New Mazda Shinari concept car pictures

Mazda released the first sight of their cool new car design called Shinar. Mazda wheels, 4-door coupe, a car show in design events in Milan, but the official "studio" plaster and exterior pictures of cars were also leaked onto the Internet, as described below.

Shinar key styling cues were prominent, with a lattice of open mouth, removes, Nagare's 'smiling faces' ultra-thin light and Aston Martin-esque side of the valve immediately behind the front wheels. Inside the concept is strictly four seats.

Future Shinar concept is not clear at this point. It could be a thorough investigation of a new generation of Mazda 6 test mule, which was discovered last week at Mazda's engineering showcase. Alternatively, a modified version of Shinar had indirect successor to the RX-8, which has become a victim of Euro 5 with respect to emissions

Ethanol Powered Mazda Furai Racecar

This is a concept vehicle which few of us will ever drive. The Furai is Mazda’s next hope in the future of car racing. While going green on the race track is not exactly an eco-minded endeavor, we’re still intrigued that this vehicle can be fully powered by ethanol. The very cool looking performance sports car shows that if ethanol has a place in the auto industry, that place is in the car racing arena.



It is a powerful machine, capable of achieving 60mph in about 3.2 seconds, and its maximum speed is 172mph. Instead of working from a regular chassis, the manufacturer decided to begin with a fully formed Courage C65 chassis, Mazda’s chassis of choice. The vehicle weighs a bit less than a ton, and its engine produces around 460bhp.

The Furai, while fully functioning, is never going to make it past the concept stage. It is simply a promotional vehicle. But at least they fitted it with an ethanol engine. There is no doubt that ethanol is a dicey proposition as a fuel source for vehicles. The fact is, that it can cause a number of problems if it’s sourcing is not managed properly. However, it is a potential stopgap replacement to our energy problems.

2009 Mazda Sports Car RX-8 Hydrogen RE

2009 Mazda Sports Car RX-8 Hydrogen RE

2009 Japan Mazda Motor Corporation (HIROSHIMA) announced that it has built the first Mazda RX-8 Hydrogen RE vehicle with Norwegian specifications, developed specifically for participation in HyNor, Norway’s national hydrogen project. The first unit will take part in ceremonies marking the official opening of HyNor’s hydrogen filling stations.

2009 Mazda Sports Car RX-8 Hydrogen RE

The initial opening ceremony will be held in Oslo on May 11, 2009. The RX-8 Hydrogen RE will then undergo certification to meet local standards and will be used for maintenance staff training. Mazda plans to commence leasing of Norwegian specification RX-8 Hydrogen RE models in Norway in summer 2009.

2009 Mazda Sports Car RX-8 Hydrogen RE

Unlike the RX-8 Hydrogen RE currently being leased in Japan, the HyNor-specification Mazda RX-8 Hydrogen RE is based on the latest European-specification Mazda RX-8 with left-hand drive and a manual transmission.

2009 Mazda Sports Car RX-8 Hydrogen RE

The HyNor project aims to enable hydrogen vehicles to travel along a 580-kilometer stretch of highway by establishing a chain of hydrogen stations between Stavanger and Oslo in Norway.

2009 Mazda Sports Car RX-8 Hydrogen RE

Mazda agreed to collaborate with HyNor on the project in November 2007 and began validation of the RX-8 Hydrogen RE’s driving performance on Norwegian public roads in October 2008.

RX7 with manga stickers.

The Mazda RX7 is a favourite of Japanse car fans with it’s outrageous styling and distinctive rotary engines. It has been popular with modifiers and tuners for a good few years and there are plenty of nice examples around. This particular RX7 has an subtle bodykit, a massive rear wing, which actually does give downforce and soem very nicely done manga style stickers.

Note the obligatory huge rear exhaust and we really like the RX7 smoked lights. The entire car is covered with sponsor style stickers and part makers logos but the colours have been kept simple and the red and white colour scheme works really well.

 

 Front view showing the carbon fibre bonnet on this RX7 and the nice front bumper with plenty of aero vents.

2012 Mazda5 First Look

2012 Mazda5 Photos

2012 Mazda5 Interior View

2010 Mazda Sport Cars Coupe Shinari Concept Car

Mazda launched the 2010 Shinari sports cars coupe at the Paris Motor Show in early October, a four door concept car that shows the new design. This design as well as to replace the Nagare design. Mazda Shinari Concept represents the profound connection of driver and machine and the beginning of Mazda's latest design theme 'KODO-Soul in Motion'. Shinari exhibits a functional aesthetic that will continue to evolve as Mazda continues to define its next generation of vehicles.

2010 Mazda Sport Cars Coupe Shinari Concept Car

The development of the Shinari Concept was actually a collaboration between three of Mazda’s design centers in Japan, Germany and the United States. Mazda also said it is working to improve the quality level of its interiors for future vehicles. With 2010 Mazda Sport Cars Coupe Shinari Concept Car as the first step, Ikuo Maeda, general manager of Mazda's design division, aims to create original Mazda designs that will be recognized around the world. He summarizes his resolve in the following words:

"My goal is to create designs that people can point to proudly and say, 'This is a Mazda design'. There is no need for Mazda to build cars for people who are only concerned with 'style' and 'trends'. Whether working on sports cars or compact cars, I have always worked to create designs that evoke an emotional response in people and I hope to keep doing the same as I remain fully committed to develop designs for people who love and admire cars. It is my personal belief that the only way to create designs that fundamentally connect with people and to create designs they love, is if the people creating them are absolutely passionate about cars and are willing to make that passion a firm policy for design expression.

The Mazda Shinari is a pure design concept model of a four-door, four-seater sport cars coupe which perfectly expresses the 'KODO - Soul of Motion' design theme in a graceful and carefree form. All of Mazda Shinari Concept's body surfaces appear as if constantly undergoing transformation. There is no static shape to be found, as if the car is in perpetual motion. For instance the subtle control of the angle of the upper surface of the side sill, from the front to the rear, results in a form that suggests a flash of speed along the body of the car. Aerodynamic performance was a major priority for Mazda Shinari Concept, and the centre of the lower sections - on both the front and rear bumpers - are designed to optimize the flow of air along the underbody of the car.

2010 Mazda Sport Cars Coupe Shinari Concept Car 

The principle of 'dedicated driving ergonomics' is further reflected in the car's next generation Human Machine Interface (HMI). The availability of smaller electronic components has allowed Mazda Shinari Concept's designers to create a floating HMI three-dimensional display; a design element that represents the very latest HMI technology . The system offers three distinct modes: 'Business, Pleasure and Sport'.

Yasushi Nakamuta, the chief designer who led the design of the third generation Mazda MX-5, was the first to begin the ideation of the Mazda Shinari Concept: "The challenge for us was to create an innovative new expression for energetic and powerful movement; something that we had never attempted before. We began by developing the design around the image of a predator, as it strikes at its prey, or the stabbing movement in kendo, Japanese fencing, to express the instant where accumulated force is released.

Ikuo Maeda say, "Further, I consider it vitally important to have an awareness of Japanese originality in designing cars for Mazda. This is not merely about incorporating traditional Japanese elements into car design. I believe in reflecting the Japanese spirit in car designs as part of a subconscious practice. So, while I consider where this may lead in the future, my plan is to create cars that will be instantly recognizable as a Mazda, even when viewed at a distance. My ultimate goal is to create a brand presence that car lovers around the world recognize as representing both Mazda originality and Japanese originality. Future Mazda's will move people physically and emotionally - this is 'KODO - Soul of Motion'."

2010 Mazda Sport Cars Coupe Shinari Concept Car 

2011 Mazda 6 Wagon Official Pictures

2011 Mazda 6 Wagon Front View

2011 Mazda 6 Wagon First Look

2011 Mazda 6 Wagon Side View

2011 Mazda 6 Wagon Interior

2011 Mazda 6 Wagon Rear View

2011 Mazda 6 Wagon Car Picture

2011 Mazda 6 Wagon Cargo Room

2011 Mazda 6 Wagon Rear Side View

2010 Mazda CX-9

Mazda CX9 (2010) has been inaugurated at New York International Auto Show. 2010 Mazda CX9 may output 273 hp at 6250 rpm and 270 lb-ft of maximum torque at 4250 rpm, because it is powered by a 3.7-liter V6 engine mated to an Aisin six-speed transmission-given Sport AT automatic with manual-mode.

Mazda CX9 (2010) equipped with Dynamic Stability Control (DSC), a Traction Control System (TCS), ABS and EBD.

2010 Mazda CX9 is equipped with a list of equipment including 4.3-inch color LCD screen full of new, two-stage seat heaters, climate control newly developed, and Advanced keyless entry and start system fob key system.

Self-POWER, REFINED PERFORMANCE

The 2010 Mazda CX-9 is powered by the engine 273 horsepower 3.7-liter V6, making the most complex searches easy and enjoyable as possible. Short-stroke 60-degree V6 is state-of-the-art-all. Advanced features including die-cast aluminum block with cast-in iron cylinder liners and aluminum cylinder heads for minimal weight. valvetrain includes chain-driven overhead camshafts dual for minimal maintenance, four valves-per-cylinder with bucket-type actuators directly acting, and variable intake valve timing. A high 10.3:1 compression ratio maximizes efficiency and power output while the throttle is electronically controlled for instantaneous response. Two close-coupled catalytic converters cleanse the exhaust without inhibiting power.

Computer-assisted analysis of a wide-technique is used to configure the cylinder block casting, to shape intake and exhaust ports, and to design a high volume exhaust system fitted with three large mufflers. Very low back pressure is one reason why the power curve was still rising at the 6500-rpm redline. In addition, forged-steel crankshaft with induction-hard journal, full of the counterweights. Engineering details even extend to the cam-drive sprocket roller chain with rubber coated for quiet operation.

A peak power of 273 horsepower at 6250 rpm to give the Mazda CX-9 with sparkling accelerating and passing performance. -Ft of torque curve continues to 250 pounds from 3000 to 6000 rpm and peaks with 270 lb-ft at 4250 rpm.

To combine excellent acceleration and high fuel mileage, Mazda CX-9, including a six-speed Aisin-awarded Sport AT automatic transmission with manual mode as standard equipment. area ratios maximize flexibility by providing enthusiastic launch acceleration with quiet cruising. Both the second overdrive gear ratio.

Front-wheel drive is standard on the Mazda CX-9 for excellent drivability, with Mazda's Active Torque All-Wheel Drive optionally available. Also used in the Mazda CX-7 crossover SUV, the system is changing rapidly adjust traction needs by monitoring wheel slippage, steering angle, yaw rate, lateral acceleration and available driveline torque. In normal driving, 100-percent of the torque sent to front-wheel drive. During the acceleration of aggressive or when one front wheel is on the verge of slip, controlled percentage of the available torque is directed to the rear axle.

A power take-off device integrated with the transaxle Mazda CX-9's spins a drive shaft attached to an active coupling built into the rear differential. Instructed by the control module, multi-plate clutch servo can be controlled routes from zero to 50 percent of available torque to the rear wheels.

CHASSIS ENGINEERED FOR SAFETY AND PERFORMANCE

The Mazda CX-9 has received the U.S. government’s National Highway Traffic Safety Administration (NHTSA) highest possible ratings in frontal and side impact crashes - five stars. In addition, both the FWD and AWD versions of the Mazda CX-9 received four-star rollover resistance ratings. With five stars to back it up, it comes as no surprise that Mazda’s advanced engineering provides Mazda CX-9 with one of the safest unibodies on the market.

Guiding development principles are:

Front frame rails that are large in section and as straight as possible.
A front subframe (supporting the powertrain, suspension, and steering equipment) attached to the unibody at six widely separated points. A forward extension integral to the subframe helps it to more effectively absorb collision energy.
B-pillars securely anchored to members in the floor and rocker areas with increased cross-section for all load-bearing members.
Rear frame rails positioned higher and configured as straight as possible.
Bumper reinforcement manufactured using a hot-stamping technique.
More than a dozen structural members in the floor and roof pillars made of high-tensile steel. Multiple steel reinforcements in the roof and a triple-H-shaped floor structure help absorb side-impact energy.
A fuel tank positioned near the middle of the vehicle and surrounded by multiple torque box crossmembers. Maximum overlap between the doors and the unibody to minimize side-impact intrusion. Energy absorbing material on front and rear door trim diminishes the transfer of impact loads to occupants.
Spot welds, laser welding in high-stress areas, and weld bonding (combination of welding and structural adhesives) to improve unibody stiffness.
Acoustical foam filler applied to internal cavities to block noise transmission from underbody into cabin areas.
Highly rigid damping sheet applied to large expanses of the floor pan to eliminate resonance and to block road noise.

For Mazda CX-9 to wear the Mazda brand symbol, it had to be more than just another crossover SUV. It had to be a true Mazda, embodying the company’s philosophy “Soul of a Sports Car.” And so engineers determined Mazda CX-9 had to have an independent suspension on all four corners.

In front, the perimeter frame mounted to the unibody through six rubber isolators supports the powertrain, the engine-speed-sensitive rack-and-pinion power steering, and a low friction strut-type suspension system using coil springs. The multilink rear suspension consists of one trailing arm and three lateral locating links per side. To minimize cargo-compartment intrusion and permit a wider load space, the rear coil spring is positioned between the lower lateral links and the unibody. A damper is located as close as possible to each rear wheel to provide excellent motion control with minimal friction. Anti-roll bars at each end maximize agility and control during assertive driving.

Twenty-inch, V-rated, low-profile radial tires (P245/50R-20) are standard equipment on the top Grand Touring model while Sport and Touring editions roll on P245/60R-18 tires. As a result, Mazda CX-9 looks and feels unusually nimble for its size and is the clear class leader for driving pleasure.

EYES IN THE BACK OF YOUR HEAD

The Blind Spot Monitoring (BSM) system supports the driver when changing lanes on roads and highways. At speeds of 20 mph or more, the system monitors areas on both sides of the vehicle to the rear. When a vehicle enters the detection area on either side, the BSM notifies the driver by illuminating a warning light located in the door mirror in the same side. If the driver then activates the turn signal, indicating a move in the same direction, the warning light will flash and the system will also sound an audible alert to immediately inform the driver of the potential danger in changing lanes.


ROOM ENOUGH FOR THEIR CHILDREN AND FRIENDS

Mazda CX-9 rides on 113.2-inch wheelbase, one of the longest in this segment, providing easy access to three rows of seating. There is plenty of room for adults in every position and enough cargo space to accommodate modern American families. Under the sleek exterior is an interior that will impress demanding customers with its space, utility, versatility, and premium features.

For ease of accommodations for all drivers, the driver's seat and steering column move quickly and easily with a long range adjustment. 60-40 split second row with three in comfort and offers approximately five-inches of travel slides lengthwise and lay back. In the third row 50-50 split-position seat and foot space is one of the leaders in class in numbers and real comfort. Log into the third row is easy, with access to almost 26 inches of space between the second row seats folded and the C-pillars. Even with the third row occupied, the Mazda CX-9 provides 17.2 cubic feet of cargo capacity, eclipsing many large sedan trunks. Both the second and third-row seats fold flat to allow additional storage all the way up to the rear of the front seat.

Extra thought is invested in small details, like how the release of the Mazda CX-9 seats are configured. For example, to release second-row seat to enter the third row requires only one simple hand motion to unlatch the seat and move forward. Similarly, a clever strap attached behind the third row seat backrest serves as both a release for folding chairs and means of pulling back upright again.

SAFETY WITH ADVANCED TECHNOLOGY

Safety features Mazda CX-9 is highlighted by advanced Roll Stability Control (RSC) system that uses both body-roll rate and the wheel speed sensors to determine when corrective action is required. Instantaneous torque decline, combined with an automatic brake application, helping to restore the Mazda CX-9 for the balance.

Four-wheel ventilated disc brakes including Anti-lock Brake System (ABS) to prevent the use of prison during an emergency. Dual-caliper front brake pistons operate together with a 12.6-inch ventilated rotors with diameter of 1.1 inches thick. single piston rear calipers squeeze 12.8-inch diameter by 0.71-inch thick rotors, also ventilated. Electronic Brake-Force Distribution (EBD) control the distribution front-to-rear braking force to take full advantage of available traction during stops. In the event the driver applies the brakes quickly in an emergency but with sufficient force to perform the function of ABS, brake assist takes over the function to stop the vehicle as soon as possible. To provide drivers with a confident feel during stops, the system of the Mazda CX-9's braking an extra-rigid so that deceleration is more directly proportional to pedal pressure than pedal travel. Benefit with a more linear response enhanced controllability.

When excessive wheel slippage is detected, a Traction Control System (TCS) automatically reduces driveline torque to help restore traction. Dynamic Stability Control (DSC) reduces driveline torque and automatically applies one or more brakes to minimize under or over-steer during emergency maneuvers.

Protection is provided by the party-curtain airbags, active sensors, which extend from first to third line. This restriction inflatable lateral spreading in a collision or a rollover to reduce the chance of injury and limb or head ejection. Inflation is maintained for about six seconds for maximum effectiveness, although the only way this system works well is when used in combination with seatbelts. Pretensioner devices automatically remove slack from the belt system immediately after the collision moderate or greater frontal and load limiters are incorporated to provide some give as the occupant moves forward. The front headrests Mazda CX-9's include new design features, which are designed primarily to reduce neck injuries during rear impacts.

Mazda CX-9 strong unibody uses the Mazda Advanced Impact-energy Distribution and Absorption System to help protect the cabin from deformation in case of danger of collision.

The combination of large parts, some of which are made of high tensile steel, envelope the passenger compartment to absorb impact energy while guard against interference.

TRIM AND ENTERTAINMENT FEATURES

Mazda CX-9 is offered in three trim levels: Sport, Touring and Grand Touring. All models include air conditioning, power windows, power door locks with remote keyless entry, trip computer, cruise control, six airbags, Bluetooth ® phone capabilities and choice of black or beige interior color.

Mazda CX-9 Sport is equipped with 18-inch aluminum wheels and tires, halogen lamps, the ability of Bluetooth ® hands-free phone and upholstery. Power front seat adjusters are optional. Stepping into Touring model adds leather seat trim, power seat adjusters-front. Grand Touring edition rolls on top of 20-inch aluminum wheels. It is also equipped with the Touring equipment plus a bright exterior door handles, rain-sensing wipers, an anti-theft alarm system, exterior mirrors with turn indicators, three-position memory driver's seat, the Blind Spot Monitoring system, HomeLink mirror auto-dimming rearview mirror, Mazda Advanced keyless entry and Start System, wood instrument panel-like trim, wood door-like trim, indirect blue interior lighting and silver to finish the surface of the rear side of the console. New features for 2010 include:

Redesigned climate control system for rear seat area
Redesigned Advanced keyless entry and start key fob system, which replaces the card design exit button (the Grand Touring model)
New available 4.3-inch, full color LCDs operating system that enables intuitive audio AM / FM radio, MP3-capable CD changer, SIRIUS satellite radio,
auxiliary input jack of the phone, hands-free, and iPod connectivity, and serves as a backup camera screen. (Touring and Grand Touring models equipped with BOSE ® package)
Two-stage heated seats (Touring and Grand Touring standards, available in Sport)

Mazda CX-9 offers as an optional feature factory towing package, power sunroof, BOSE ® audio system, power lift gate and rear seat entertainment system. (Rear seat entertainment system is packaged with the upgraded Bose ® audio system and includes an AC power outlet 115-volt) Navigation. Available as a stand-alone option (on the Grand Touring model) and include a DVD navigation system, and backup monitor. New for 2010, the back-up system monitor is equipped with wide-angle camera, which increases the field of vision, allowing for a broader view of objects or persons who may be behind the vehicle.

All 2010 Mazdas come with a roadside assistance program. With a call to the toll free number, owners can access roadside assistance 24 hours a day, 365 days a year throughout the United States and Canada. In addition, a comprehensive warranty three-year/36 0.000-mile span every section on the vehicle except those that depend on normal usage. Also, all 2010 model Mazda receive five-year/60, 000 mile powertrain warranty five-year/unlimited-mileage corrosion warranty.

2010 Mazda CX-9

Mazda CX9 (2010) has been inaugurated at New York International Auto Show. 2010 Mazda CX9 may output 273 hp at 6250 rpm and 270 lb-ft of maximum torque at 4250 rpm, because it is powered by a 3.7-liter V6 engine mated to an Aisin six-speed transmission-given Sport AT automatic with manual-mode.

Mazda CX9 (2010) equipped with Dynamic Stability Control (DSC), a Traction Control System (TCS), ABS and EBD.

2010 Mazda CX9 is equipped with a list of equipment including 4.3-inch color LCD screen full of new, two-stage seat heaters, climate control newly developed, and Advanced keyless entry and start system fob key system.

Self-POWER, REFINED PERFORMANCE

The 2010 Mazda CX-9 is powered by the engine 273 horsepower 3.7-liter V6, making the most complex searches easy and enjoyable as possible. Short-stroke 60-degree V6 is state-of-the-art-all. Advanced features including die-cast aluminum block with cast-in iron cylinder liners and aluminum cylinder heads for minimal weight. valvetrain includes chain-driven overhead camshafts dual for minimal maintenance, four valves-per-cylinder with bucket-type actuators directly acting, and variable intake valve timing. A high 10.3:1 compression ratio maximizes efficiency and power output while the throttle is electronically controlled for instantaneous response. Two close-coupled catalytic converters cleanse the exhaust without inhibiting power.

Computer-assisted analysis of a wide-technique is used to configure the cylinder block casting, to shape intake and exhaust ports, and to design a high volume exhaust system fitted with three large mufflers. Very low back pressure is one reason why the power curve was still rising at the 6500-rpm redline. In addition, forged-steel crankshaft with induction-hard journal, full of the counterweights. Engineering details even extend to the cam-drive sprocket roller chain with rubber coated for quiet operation.

A peak power of 273 horsepower at 6250 rpm to give the Mazda CX-9 with sparkling accelerating and passing performance. -Ft of torque curve continues to 250 pounds from 3000 to 6000 rpm and peaks with 270 lb-ft at 4250 rpm.

To combine excellent acceleration and high fuel mileage, Mazda CX-9, including a six-speed Aisin-awarded Sport AT automatic transmission with manual mode as standard equipment. area ratios maximize flexibility by providing enthusiastic launch acceleration with quiet cruising. Both the second overdrive gear ratio.

Front-wheel drive is standard on the Mazda CX-9 for excellent drivability, with Mazda's Active Torque All-Wheel Drive optionally available. Also used in the Mazda CX-7 crossover SUV, the system is changing rapidly adjust traction needs by monitoring wheel slippage, steering angle, yaw rate, lateral acceleration and available driveline torque. In normal driving, 100-percent of the torque sent to front-wheel drive. During the acceleration of aggressive or when one front wheel is on the verge of slip, controlled percentage of the available torque is directed to the rear axle.

A power take-off device integrated with the transaxle Mazda CX-9's spins a drive shaft attached to an active coupling built into the rear differential. Instructed by the control module, multi-plate clutch servo can be controlled routes from zero to 50 percent of available torque to the rear wheels.

CHASSIS ENGINEERED FOR SAFETY AND PERFORMANCE

The Mazda CX-9 has received the U.S. government’s National Highway Traffic Safety Administration (NHTSA) highest possible ratings in frontal and side impact crashes - five stars. In addition, both the FWD and AWD versions of the Mazda CX-9 received four-star rollover resistance ratings. With five stars to back it up, it comes as no surprise that Mazda’s advanced engineering provides Mazda CX-9 with one of the safest unibodies on the market.

Guiding development principles are:

Front frame rails that are large in section and as straight as possible.
A front subframe (supporting the powertrain, suspension, and steering equipment) attached to the unibody at six widely separated points. A forward extension integral to the subframe helps it to more effectively absorb collision energy.
B-pillars securely anchored to members in the floor and rocker areas with increased cross-section for all load-bearing members.
Rear frame rails positioned higher and configured as straight as possible.
Bumper reinforcement manufactured using a hot-stamping technique.
More than a dozen structural members in the floor and roof pillars made of high-tensile steel. Multiple steel reinforcements in the roof and a triple-H-shaped floor structure help absorb side-impact energy.
A fuel tank positioned near the middle of the vehicle and surrounded by multiple torque box crossmembers. Maximum overlap between the doors and the unibody to minimize side-impact intrusion. Energy absorbing material on front and rear door trim diminishes the transfer of impact loads to occupants.
Spot welds, laser welding in high-stress areas, and weld bonding (combination of welding and structural adhesives) to improve unibody stiffness.
Acoustical foam filler applied to internal cavities to block noise transmission from underbody into cabin areas.
Highly rigid damping sheet applied to large expanses of the floor pan to eliminate resonance and to block road noise.

For Mazda CX-9 to wear the Mazda brand symbol, it had to be more than just another crossover SUV. It had to be a true Mazda, embodying the company’s philosophy “Soul of a Sports Car.” And so engineers determined Mazda CX-9 had to have an independent suspension on all four corners.

In front, the perimeter frame mounted to the unibody through six rubber isolators supports the powertrain, the engine-speed-sensitive rack-and-pinion power steering, and a low friction strut-type suspension system using coil springs. The multilink rear suspension consists of one trailing arm and three lateral locating links per side. To minimize cargo-compartment intrusion and permit a wider load space, the rear coil spring is positioned between the lower lateral links and the unibody. A damper is located as close as possible to each rear wheel to provide excellent motion control with minimal friction. Anti-roll bars at each end maximize agility and control during assertive driving.

Twenty-inch, V-rated, low-profile radial tires (P245/50R-20) are standard equipment on the top Grand Touring model while Sport and Touring editions roll on P245/60R-18 tires. As a result, Mazda CX-9 looks and feels unusually nimble for its size and is the clear class leader for driving pleasure.

EYES IN THE BACK OF YOUR HEAD

The Blind Spot Monitoring (BSM) system supports the driver when changing lanes on roads and highways. At speeds of 20 mph or more, the system monitors areas on both sides of the vehicle to the rear. When a vehicle enters the detection area on either side, the BSM notifies the driver by illuminating a warning light located in the door mirror in the same side. If the driver then activates the turn signal, indicating a move in the same direction, the warning light will flash and the system will also sound an audible alert to immediately inform the driver of the potential danger in changing lanes.


ROOM ENOUGH FOR THEIR CHILDREN AND FRIENDS

Mazda CX-9 rides on 113.2-inch wheelbase, one of the longest in this segment, providing easy access to three rows of seating. There is plenty of room for adults in every position and enough cargo space to accommodate modern American families. Under the sleek exterior is an interior that will impress demanding customers with its space, utility, versatility, and premium features.

For ease of accommodations for all drivers, the driver's seat and steering column move quickly and easily with a long range adjustment. 60-40 split second row with three in comfort and offers approximately five-inches of travel slides lengthwise and lay back. In the third row 50-50 split-position seat and foot space is one of the leaders in class in numbers and real comfort. Log into the third row is easy, with access to almost 26 inches of space between the second row seats folded and the C-pillars. Even with the third row occupied, the Mazda CX-9 provides 17.2 cubic feet of cargo capacity, eclipsing many large sedan trunks. Both the second and third-row seats fold flat to allow additional storage all the way up to the rear of the front seat.

Extra thought is invested in small details, like how the release of the Mazda CX-9 seats are configured. For example, to release second-row seat to enter the third row requires only one simple hand motion to unlatch the seat and move forward. Similarly, a clever strap attached behind the third row seat backrest serves as both a release for folding chairs and means of pulling back upright again.

SAFETY WITH ADVANCED TECHNOLOGY

Safety features Mazda CX-9 is highlighted by advanced Roll Stability Control (RSC) system that uses both body-roll rate and the wheel speed sensors to determine when corrective action is required. Instantaneous torque decline, combined with an automatic brake application, helping to restore the Mazda CX-9 for the balance.

Four-wheel ventilated disc brakes including Anti-lock Brake System (ABS) to prevent the use of prison during an emergency. Dual-caliper front brake pistons operate together with a 12.6-inch ventilated rotors with diameter of 1.1 inches thick. single piston rear calipers squeeze 12.8-inch diameter by 0.71-inch thick rotors, also ventilated. Electronic Brake-Force Distribution (EBD) control the distribution front-to-rear braking force to take full advantage of available traction during stops. In the event the driver applies the brakes quickly in an emergency but with sufficient force to perform the function of ABS, brake assist takes over the function to stop the vehicle as soon as possible. To provide drivers with a confident feel during stops, the system of the Mazda CX-9's braking an extra-rigid so that deceleration is more directly proportional to pedal pressure than pedal travel. Benefit with a more linear response enhanced controllability.

When excessive wheel slippage is detected, a Traction Control System (TCS) automatically reduces driveline torque to help restore traction. Dynamic Stability Control (DSC) reduces driveline torque and automatically applies one or more brakes to minimize under or over-steer during emergency maneuvers.

Protection is provided by the party-curtain airbags, active sensors, which extend from first to third line. This restriction inflatable lateral spreading in a collision or a rollover to reduce the chance of injury and limb or head ejection. Inflation is maintained for about six seconds for maximum effectiveness, although the only way this system works well is when used in combination with seatbelts. Pretensioner devices automatically remove slack from the belt system immediately after the collision moderate or greater frontal and load limiters are incorporated to provide some give as the occupant moves forward. The front headrests Mazda CX-9's include new design features, which are designed primarily to reduce neck injuries during rear impacts.

Mazda CX-9 strong unibody uses the Mazda Advanced Impact-energy Distribution and Absorption System to help protect the cabin from deformation in case of danger of collision.

The combination of large parts, some of which are made of high tensile steel, envelope the passenger compartment to absorb impact energy while guard against interference.

TRIM AND ENTERTAINMENT FEATURES

Mazda CX-9 is offered in three trim levels: Sport, Touring and Grand Touring. All models include air conditioning, power windows, power door locks with remote keyless entry, trip computer, cruise control, six airbags, Bluetooth ® phone capabilities and choice of black or beige interior color.

Mazda CX-9 Sport is equipped with 18-inch aluminum wheels and tires, halogen lamps, the ability of Bluetooth ® hands-free phone and upholstery. Power front seat adjusters are optional. Stepping into Touring model adds leather seat trim, power seat adjusters-front. Grand Touring edition rolls on top of 20-inch aluminum wheels. It is also equipped with the Touring equipment plus a bright exterior door handles, rain-sensing wipers, an anti-theft alarm system, exterior mirrors with turn indicators, three-position memory driver's seat, the Blind Spot Monitoring system, HomeLink mirror auto-dimming rearview mirror, Mazda Advanced keyless entry and Start System, wood instrument panel-like trim, wood door-like trim, indirect blue interior lighting and silver to finish the surface of the rear side of the console. New features for 2010 include:

Redesigned climate control system for rear seat area
Redesigned Advanced keyless entry and start key fob system, which replaces the card design exit button (the Grand Touring model)
New available 4.3-inch, full color LCDs operating system that enables intuitive audio AM / FM radio, MP3-capable CD changer, SIRIUS satellite radio,
auxiliary input jack of the phone, hands-free, and iPod connectivity, and serves as a backup camera screen. (Touring and Grand Touring models equipped with BOSE ® package)
Two-stage heated seats (Touring and Grand Touring standards, available in Sport)

Mazda CX-9 offers as an optional feature factory towing package, power sunroof, BOSE ® audio system, power lift gate and rear seat entertainment system. (Rear seat entertainment system is packaged with the upgraded Bose ® audio system and includes an AC power outlet 115-volt) Navigation. Available as a stand-alone option (on the Grand Touring model) and include a DVD navigation system, and backup monitor. New for 2010, the back-up system monitor is equipped with wide-angle camera, which increases the field of vision, allowing for a broader view of objects or persons who may be behind the vehicle.

All 2010 Mazdas come with a roadside assistance program. With a call to the toll free number, owners can access roadside assistance 24 hours a day, 365 days a year throughout the United States and Canada. In addition, a comprehensive warranty three-year/36 0.000-mile span every section on the vehicle except those that depend on normal usage. Also, all 2010 model Mazda receive five-year/60, 000 mile powertrain warranty five-year/unlimited-mileage corrosion warranty.